There was an error. Please try again.
This page is already listed in your guide. Please choose a different page to add.
In Canada, the federal government groups and organizes occupations based on a National Occupational Classification (NOC) system. This alis occupation may not reflect the entire NOC group it is part of. Data for the NOC group can apply across multiple occupations.
The NOC system is updated every 5 years to reflect changes in the labour market. Government forms and labour market data may group and refer to an occupation differently, depending on the system used.
Here is how this occupation has been classified over time.
2006 NOC
2006 NOC-S
2011 NOC
2016 NOC
2021 NOC
2023 OaSIS
On a typical job, industrial mechanics (millwrights) read diagrams and schematic drawings as well as service manuals to determine work procedures. They also:
They may do some fabrication and tack welding (to temporarily hold components in place until they can be welded by qualified personnel), and maintain an inventory of replacement parts. Sometimes they supervise the work of others.
Industrial mechanics (millwrights) may find themselves primarily in construction work or plant maintenance, or doing a combination of both. They often work in close association with other trades people such as machinists, instrumentation and control technician, welders, electricians and steamfitter-pipefitters.
Working conditions vary from one job to another. On construction job sites, industrial mechanics (millwrights) are exposed to a variety of weather conditions. In plant maintenance, they may work indoors and outdoors. Hours of work also vary, and shift work and some overtime may be required.
The work environment may be noisy and there is some risk of injury when working with heavy machinery, so there is a strong emphasis on safety. Industrial mechanics (millwrights) may be required to lift and move items that weigh over 25 kilograms.
In Alberta, this occupation is part of 1 or more 2006 National Occupational Classification (NOC) groups. If there are multiple related NOC groups, select a NOC heading to learn about each one.
Interest in setting up and assembling machinery and equipment before installation using hand and power tools and welding equipment
Interest in analyzing information to inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions, to adjust machinery and to repair and replace defective parts; and in installing, trouble-shooting and maintaining power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls
Interest in speaking with other workers to direct them in constructing foundations for machinery; and in cleaning, lubricating and performing other routine maintenance work on machinery
To identify or change your interest codes, complete the Interests Exercise in CAREERinsite.
The interest code helps you figure out if you’d like to work in a particular occupation.
It’s based on the Canadian Work Preference Inventory (CWPI), which measures 5 occupational interests: Directive, Innovative, Methodical, Objective, and Social.
Each set of 3 interest codes for this NOC group is listed in order of importance.
A code in capital letters means it’s a strong fit for the occupation.
A code in all lowercase letters means the fit is weaker.
To fill in or change the values for your abilities, complete the Abilities Exercise in CAREERinsite.
A Quick Guide
You are born with abilities that help you process certain types of information and turn it into action. These abilities influence which skills you can learn more easily.
The abilities or aptitudes shown for this NOC group come from the General Aptitude Test Battery (GATB). The GATB measures 9 aptitudes. It groups them into 3 categories: mental, visual, and physical.
The abilities scores range from 1 to 5, with 5 being stronger.
Industrial mechanics (millwrights) need:
They should enjoy variety and doing precision work with machinery and equipment.
In Alberta, this occupation is part of 1 or more 2016 National Occupational Classification (NOC) groups. If there are multiple related NOC groups, select a NOC heading to learn about each one.
This chart shows which job skills are currently in highest demand for this occupational group. It was created using this occupation's 100 most recent Alberta job postings, collected between Jun 22, 2023 and Apr 18, 2024.
Review these skills to learn:
| Tasks: Repair or replace defective machinery parts | 82 |
|---|---|
| Tasks: Perform routine maintenance work on machinery | 78 |
| Tasks: Detect and troubleshoot irregularities and malfunctions | 77 |
| Health benefits: Health care plan | 70 |
| Work Setting: Maintenance | 68 |
| Health benefits: Dental plan | 67 |
| Work Setting: Repair | 66 |
| Tasks: Installing machinery and equipment | 66 |
| Attention to detail | 64 |
| Construction Specialization: Team player | 60 |
To work in Alberta, an industrial mechanic (millwright) must be ONE of the following:
To register with Alberta Apprenticeship and Industry Training, apprentices must find a suitable employer who is willing to hire and train them. They must also meet ONE of the following:
Most employers prefer to hire high school graduates.
The term of apprenticeship is 4 years (four 12-month periods) that include a minimum of 1,560 hours of on-the-job training and 8 weeks of classroom instruction each year.
High school students can earn credits toward apprenticeship training and a high school diploma at the same time through the Registered Apprenticeship Training Program (RAP). Applicants who have related training or work experience may be eligible for admission, credit, or certification. Credits may reduce the period of apprenticeship.
Industrial mechanic (millwright) apprentices may take the interprovincial exam in the final period of their apprenticeship training to earn a Red Seal (certification recognized in most parts of Canada).
Classroom instruction is arranged by Alberta Apprenticeship and Industry Training. For more information, see the Apprenticeship Training Catalogue.
For a broad list of programs and courses that may be related to this occupation try searching using keywords.
The following schools offer programs or courses that are related to this occupation but are not required to enter the field.
To expand or narrow your search for programs related to this occupation, visit Post-Secondary Programs.
Completing a program does not guarantee entrance into an occupation. Before enrolling in an education program, prospective students should look into various sources for education options and employment possibilities. For example, contact associations and employers in this field.
Industrial mechanics (millwrights) install, maintain, repair and troubleshoot stationary industrial machinery and mechanical equipment in sites such as factories, production plants and recreational facilities. For more information, see the Designated Trades Profile section of Alberta’s Tradesecrets website.
Under Alberta’s Skilled Trades and Apprenticeship Education Act [pdf], you do not have to be certified if you are self-employed or work for an employer who is satisfied that you have the skills and knowledge expected of a journeyperson certified by Alberta Apprenticeship and Industry Training. To learn the trade, you must become a registered apprentice.
For information on what you need and other details, visit the certification profile Industrial Mechanic (Millwright).
Certified tradespeople who want to build their business skills may obtain an Achievement in Business Competencies (Blue Seal) Certificate from Alberta Apprenticeship and Industry Training.
Source: 2019-2023 Alberta Regional Occupational Demand Outlook
Industrial mechanics (millwrights) are employed by manufacturing, processing and construction companies, as well as places such as amusement parks and ski hills. Those working in construction may experience periods of unemployment.
Industrial mechanics (millwrights) are exposed to the duties involved in a variety of other trades, which means they are good candidates for promotion to supervisory and superintendent positions.
This section shows the industries where the majority of people in this occupation work. The data is based on the 2016 Census.
In Alberta, this occupation is part of 1 or more 2016 National Occupational Classification (NOC) groups.
In the 7311: Construction millwrights and industrial mechanics occupational group, 76.5% of people work in:
Employment outlook is influenced by a wide variety of factors including:
In Alberta, the 7311: Construction millwrights and industrial mechanics occupational group is expected to have a below-average annual growth of 1.3% from 2019 to 2023. In addition to job openings created by employment turnover, 117 new positions are forecasted to be created within this occupational group each year.
Note
NOC groups often include several related occupations. Although there is labour market data for the larger NOC group, this occupation makes up only a part of that group. It means data for this occupation may be different than the data shown. For example, only some of the new positions to be created will be for this occupation. It also applies to other data for the NOC group such as number of people employed.
Source: 2019-2023 Alberta Regional Occupational Demand Outlook
Employment turnover is expected to increase as members of the baby boom generation retire over the next few years.
Journeyperson industrial mechanics (millwrights) wage rates vary but generally range from $30 to $45 an hour plus benefits (2019 estimates). Apprentices earn at least 60% of the journeyperson wage rate in their place of employment in the first year, 70% in the second, 80% in the third and 90% in the fourth.
In Alberta, this occupation is part of 1 or more 2016 National Occupational Classification (NOC) groups. If there are multiple related NOC groups, select a NOC heading to learn about each one.
Unless otherwise noted, the data shown here is for all industries and all regions in Alberta.
All wage estimates are hourly except where otherwise indicated. Wages and salaries do not include overtime hours, tips, benefits, profit shares, bonuses (unrelated to production), and other forms of compensation.
To see the full survey data for this NOC group, visit the wage profile.
Other wage sources
To make an informed wage and salary decision, research other wage sources [pdf] to supplement this data.
High Reliability, represents a CV of less than or equal to 6.00% and 30 survey observations and/or represents 50% or more of all estimated employment for the occupation.
| Wages* | Low (5th percentile) | High (95th percentile) | Average | Median |
|---|---|---|---|---|
| Starting | $21.00 | $61.23 | $41.04 | $42.00 |
| Overall | $27.00 | $61.91 | $42.93 | $42.23 |
| Top | $29.00 | $64.62 | $46.78 | $45.00 |
Swipe left and right to view all data. Scroll left and right to view all data.
* All wage estimates are hourly except where otherwise indicated. Wages and salaries do not include overtime hours, tips, benefits, profit shares, bonuses (unrelated to production) and other forms of compensation.
Pay brackets for hourly wages
| ALL INDUSTRIES | $83,433 |
|---|---|
| Oil & Gas Extraction | $91,179 |
| Utilities | $85,455 |
| Construction | $79,929 |
| Manufacturing | $84,617 |
| Wholesale Trade | $81,246 |
| Health Care & Social Assistance | $88,629 |
| Other Services (Repair, Personal Services and Related) | $84,781 |
| Public Administration | $83,699 |
Alberta Apprenticeship and Industry Training website: tradesecrets.alberta.ca
Get information and referrals about career, education, and employment options from Alberta Supports.
Updated Mar 31, 2020. The information contained in this profile is current as of the dates shown. Salary, employment outlook, and educational program information may change without notice. It is advised that you confirm this information before making any career decisions.
