Skip to the main content
This website uses cookies to give you a better online experience. By using this website or closing this message, you are agreeing to our cookie policy. More information
Alberta Supports Contact Centre

Toll Free 1-877-644-9992

Logging/Forestry Equipment Operators

Logging / forestry equipment operators use machinery and equipment to fell, skid, process and load trees at logging sites and to construct and reclaim temporary forest access roads.

Also Known As

Equipment Operator, Feller Buncher Operator, Forestry Equipment Operator, Forwarder Operator, Log Loader Operator, Portable Chipper Operator, Processor Operator, Skidder Operator, Tree Cutter

NOC Codes

In Canada, the federal government groups and organizes occupations based on a National Occupational Classification (NOC) system. This alis occupation may not reflect the entire NOC group it is part of. Data for the NOC group can apply across multiple occupations.

The NOC system is updated every 5 years to reflect changes in the labour market. Government forms and labour market data may group and refer to an occupation differently, depending on the system used.

Here is how this occupation has been classified over time.

2006 NOC

  • 8241.1: Cable Yarding System Operators

2006 NOC-S

  • I151: Logging Machinery Operators

2011 NOC

  • 8241: Logging machinery operators

2016 NOC

  • 8241: Logging machinery operators

2021 NOC

  • 83110: Logging machinery operators

2023 OaSIS

  • 83110.00: Logging machinery operators
Updated Mar 04, 2021

Logging / forestry equipment operators perform a broad range of logging operations to harvest timber. They use machines to convert standing trees into forms suitable to be transported in log-haul trucks for use in mills.

Logging / forestry equipment operators work in natural settings to meet environmental, log quality and utilization standards. The complex machines they operate may require manipulating levers and foot pedals and using onboard computers to monitor and control operations.

Depending on the harvesting method, several logging / forestry equipment operators may be required at each logging site. These may include:

  • Feller-buncher operators who operate tracked, excavator-like machines that cut trees at the base and pile them in bunches to be moved elsewhere
  • Delimber operators, who operate machines that remove limbs and log defects from felled trees and buck logs to meet requirements
  • Harvesters, who operate machines that can fell, de-limb and cut trees into logs of full or short wood lengths. The logs are then bunched into piles for delivery to roadsides
  • Skidder operators, who operate rubber tired, 4-wheel drive machines that move trees from the harvest area to the roadside and pile trees to allow easy access for delimber or process operators
  • Processor operators, who operate excavator-like machines that de-limb and process trees at the roadside. This usually involves stripping limbs, cutting logs into predetermined lengths and piling them for loading
  • Forwarder operators, who load and carry logs over undeveloped trails to the roadside
  • Log loader operators, who raise logs as smoothly and accurately as possible and place them on log haul trucks to form balanced loads within legal axle-weight limits. Once the logs are at the mill, log loader operators take the logs off the log-haul trucks
  • Portable chipper operators, who operate machines that reduce whole trees to chips at the harvest site roadside. They then blow the chips into tractor-trailer units to be hauled to pulp or paper manufacturing plants

Working with logging / forestry equipment requires skill and concentration. To operate increasingly sophisticated equipment, operators also monitor on-board computers that illustrate machine health, productivity and location in the operating area. Operators must have the knowledge required to make harvesting decisions that can have a long-term impact on the forest.

For example, tree processor operators must know about log quality and be able to interpret printouts generated by onboard computers. They also must be able to maintain complex equipment. Operators should also have basic mechanic skills to run pre-checks on equipment before operations start, or to perform minor repairs on equipment in the field.

Working Conditions
Updated Mar 04, 2021
  • Strength Required Lift up to 10 kg

Logging / forestry equipment operators may work primarily in comfortable cabs, or outdoors in noisy environments and extreme weather conditions. They may work on steep, wet or uneven terrain. Maintenance and minor repairs are commonly conducted on the machines in these outdoor environments. Operators regularly lift items weighing up to 10 kilograms. Occasionally they are required to manually lift loads weighing up to 20 kilograms.

Hours of work may include 12-hour shifts and night shifts. Operators may commute daily to the logging site or be away from home for periods of a week or more in isolated logging camps.

Logging / forestry equipment operators are exposed to hazards associated with operating heavy equipment and working in a forest environment. Health and safety risks have been greatly reduced through advances in technology, safety engineering and operating procedures.

Interests & Abilities

In Alberta, this occupation is part of 1 or more 2006 National Occupational Classification (NOC) groups. If there are multiple related NOC groups, select a NOC heading to learn about each one.

Cable Yarding System Operators

2006 NOC: 8241.1

Interest Codes

Interest Codes for This NOC Group

Interest in driving - operating machines to transport trees from logging areas to landing and log-loading sites in mountainous terrain; and in assisting mechanics with major breakdowns and dismantling equipment


Interest in comparing information to clean and maintain yarder machinery; and in ensuring proper equipment conditions and normal operations


Interest in making minor repairs

Your Interest Codes

To identify or change your interest codes, complete the Interests Exercise in CAREERinsite.

Reading Interest Codes
A Quick Guide

The interest code helps you figure out if you’d like to work in a particular occupation. 

It’s based on the Canadian Work Preference Inventory (CWPI), which measures 5 occupational interests: Directive, Innovative, Methodical, Objective, and Social.

Each set of 3 interest codes for this NOC group is listed in order of importance.

A code in capital letters means it’s a strong fit for the occupation.

A code in all lowercase letters means the fit is weaker.

Learn About Interests


Typical ability expectations for this NOC group
Your abilities

To fill in or change the values for your abilities, complete the Abilities Exercise in CAREERinsite.

Mental Abilities

General Learning Ability

Verbal Ability

Numerical Ability

Visual Abilities

Spatial Perception

Form Perception

Clerical Perception

Physical Abilities

Motor Coordination

Finger Dexterity

Manual Dexterity

Understanding Abilities

A Quick Guide

You are born with abilities that help you process certain types of information and turn it into action. These abilities influence which skills you can learn more easily.

The abilities or aptitudes shown for this NOC group come from the General Aptitude Test Battery (GATB). The GATB measures 9 aptitudes. It groups them into 3 categories: mental, visual, and physical.

The abilities scores range from 1 to 5, with 5 being stronger.

Learn About Abilities

Traits & Skills
Updated Mar 04, 2021

Logging/forestry equipment operators need:

  • An interest in working in a forest environment
  • Strength and stamina
  • Good hand-eye co-ordination
  • Accuracy in judging distances
  • Alertness while performing repetitious tasks
  • Communication skills, to pass oral /written exams and handle the required paper work
  • An ability to make quick decisions
  • An ability to work alone and in a team
  • An ability to use a tablet or on-board computer

Operators should enjoy driving and operating heavy equipment, having clear rules and organized methods for their work, and servicing machinery.

In Alberta, this occupation is part of 1 or more 2016 National Occupational Classification (NOC) groups. If there are multiple related NOC groups, select a NOC heading to learn about each one.

Top 10 Skills Employers Are Looking For

Logging machinery operators

2016 NOC: 8241

This chart shows which job skills are currently in highest demand for this occupational group. It was created using this occupation's 68 most recent Alberta job postings, collected between Oct 29, 2021 and Jul 15, 2024.

Review these skills to learn:

  • Whether or not this occupation matches your skill set
  • What training you may need to get these skills
  • What skills to highlight in your resumé, cover letter, and interview.
Type of Harvesting: Saw log harvesting
Personal Suitability: Team player
Assist other logging and forestry workers
Work Site Environment: Outdoors
Equipment and Machinery Experience: Log processor
Write daily basic progress reports
Type of Logging: Clear cutting (patch logging)
Type of Harvesting: Pulpwood harvesting
Personal Suitability: Organized
Personal Suitability: Judgement
Educational Requirements
Updated Mar 04, 2021
  • Minimum Education Varies

There are no formal educational requirements for logging / forestry equipment operator occupations. Logging / forestry equipment operators learn their skills through occupation-specific training and while on the job. However, applicants must be able to read manuals and other materials that are written at a Grade 9 reading level.

Before they are allowed on site, new hires may be required to have:

  • A first aid certificate
  • Workplace Hazardous Materials Information Systems (WHMIS) training
  • Transport of Dangerous Goods (TDG) training
  • Sour Gas (H2S) training
  • Ground Disturbance training

The following qualifications would be definite assets when seeking employment:

  • Related experience or training (for example, in hydraulic / electronic heavy equipment operation, hazards assessment or the use of global positioning and data systems)
  • Wildlife safety training
  • Chain saw certificate
  • Equipment maintenance and service training
  • A high school diploma
  • Forestry or environmental courses (for example, training related to water course crossing, harvesting ground rules and log quality)

Most companies provide on-the-job training under the supervision of an experienced, competent worker. The length of the training period varies with the type of machine and the trainee’s ability, but usually takes about 6 months. Peak productivity usually takes 1 to 5 years operating. On-the-job training may be supplemented by a few weeks of training sponsored by an equipment manufacturer. Besides equipment training, operators will complete environmental management system training annually. This may be in person, self-study, or online.

Trained logging / forestry equipment operators must be able to:

  • Accurately identify tree species
  • Employ efficient, sound felling and logging practices
  • Maintain equipment effectively
  • Read maps
  • Adapt methods to suit local conditions
  • Understand and meet environmental practice standards

A working knowledge of provincial harvesting rules and regulations governing logging is essential to minimize environmental damage.

Because machinery maintenance is required during the off season and when breakdowns occur, operators should have the mechanical skills required to handle minor repairs and recognize major problems.

To expand or narrow your search for programs related to this occupation, visit Post-Secondary Programs.

Completing a program does not guarantee entrance into an occupation. Before enrolling in an education program, prospective students should look into various sources for education options and employment possibilities. For example, contact associations and employers in this field.

Certification Requirements
Updated Mar 04, 2021
  • Certification Not Regulated

There is currently no provincial legislation regulating this occupation in Alberta.

Employment & Advancement
Updated Mar 04, 2021

Logging / forestry equipment operators are employed by:

  • Logging contractors
  • Forestry and lumber companies
  • Pulp and paper companies
  • Oil and gas companies (for right-of-way cutting)
  • Utility companies (for right-of-way cutting)

Logging / forestry equipment operators often work on a seasonal basis in Alberta, usually from September / October to March / April (depending on the arrival/departure of frost and how wet the ground is). Private contractors may work year-round, depending on the method of logging and where cut blocks are located. Many companies combine their logging operations with other heavy equipment work to create year-round employment.

Operators may advance from operating simpler machines to more complex ones or move into operating other heavy-duty equipment such as backhoes, crawler tractors, scarifiers and graders. For more information, see the Heavy Equipment Operator occupational profile. Those with several years of work experience and demonstrated leadership abilities may advance to crew foreman and supervisory positions. Some purchase their own equipment and become private contractors.

Industry Concentration

This section shows the industries where the majority of people in this occupation work. The data is based on the 2016 Census.

In Alberta, this occupation is part of 1 or more 2016 National Occupational Classification (NOC) groups.

In the 8241: Logging machinery operators occupational group, 80.0% of people work in:

Employment Outlook

Employment outlook is influenced by a wide variety of factors including:

  • Time of year (for seasonal jobs)
  • Location in Alberta
  • Employment turnover (when people leave existing positions)
  • Occupational growth (when new positions are created)
  • Size of the occupation
  • Trends and events that affect overall employment, especially in the industry or industries from the previous list

In Alberta, the 8241: Logging machinery operators occupational group is expected to have an above-average annual growth of 2.9% from 2021 to 2025. In addition to job openings created by employment turnover, 46 new positions are forecasted to be created within this occupational group each year.

NOC groups often include several related occupations. Although there is labour market data for the larger NOC group, this occupation makes up only a part of that group. It means data for this occupation may be different than the data shown. For example, only some of the new positions to be created will be for this occupation. It also applies to other data for the NOC group such as number of people employed.

Source: 2021-2025 Alberta Regional Occupational Demand Outlook

Employment turnover is expected to increase as members of the baby boom generation retire over the next few years.

Related Alberta Job Postings
Wage & Salary
Updated Sep 29, 2022

Hourly wages for logging / forestry equipment operators vary depending on the employer and the type of work performed. Some logging / forestry equipment operators work on a piecework basis, which means their pay is based on the volume and quality of work performed.

Logging / forestry equipment operators are part of the larger 2016 National Occupational Classification 8241: Logging machinery operators.

According to the 2021 Alberta Wage and Salary Survey, Albertans in the Logging machinery operators occupational group earned on average from $27.57 to $40.41 an hour. The overall average was $33.85 an hour. For more information, see the Logging machinery operators wage profile.

Related Post-Secondary Field of Study
  • Environment, Forestry and Related Studies
  • Trades, Industrial and Related Training
Other Sources of Information
Updated Mar 04, 2021

Woodlands Operations Learning Foundation website:

Work Wild website:

Get information and referrals about career, education, and employment options from Alberta Supports.

Updated Mar 04, 2021. The information contained in this profile is current as of the dates shown. Salary, employment outlook, and educational program information may change without notice. It is advised that you confirm this information before making any career decisions.

Was this page useful?